MGR-ZK80200
Single Phase AC Solid State Rectifier Relay
MGR-ZK Series
Solid State Rectifier
SSR-ZK Series Single Phase Solid State Rectifier Relay has built-in rectifier circuit (rectifier function) and switch circuit (electronic switch function), which can be directly connected to the single-phase AC power supply and the DC load, and be controlled by DC control signal. According to rated voltage...
More
Basic Parameters
Control Voltage: 3~32VDC
Control Current: Low input current, ≤20mA
Power Voltage: Single phase 800VAC
Load Current: 200A
Dimensions: 105mm*75mm*33mm
Mounting: Panel mount
Features
"Ultra low" input current
Low output off-state leakage current
Low output on-state voltage drop
Display output status via LED
Standard output RC snubber circuit
Notice
If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.
When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.
* Please contact us if you need to customize according to your special needs.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
