Location: Home > Showroom  

MGR-DHK15A200V
DC Reversible Electrical Motor Rotation Controller

MGR-DHK15A200V

MGR-DHK Series

Electrical Motor Controller

MGR-DHK Series DC Reversible Electrical Motor Rotation Controller is a DC to DC solid state relay.  As a DC reversible motor controller, MGR-DHK Series uses DC control signal to control the direction of the DC FWD/REV Bi-directional Electrical Motor...

More

Basic Parameters


Control Voltage:  10~32VDC

Load Voltage:  200VDC

Load Current:  15A

Dimensions:  105mm*75mm*33mm

Mounting:  Panel mount

Features


Low-impedance MOSFET as the output component minimize the total power consumption

"Ultra low" input current

Low output off-state leakage current

Low output on-state voltage drop

Two color (Red & Green) LED output status

Built-in forward/reverse interlock protection function

Notice


If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

* Please contact us if you need to customize according to your special needs.


  Get in touch with us now!


Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!

*Please check the trash box of your mailbox, if you do not receive our email.