JCW Series
Analog Type Proximity Sensor
JCW series analog type proximity sensor has 1-18mm detection distance. JCW series proximity sensors have the advantages of adjustable distance, simple to operate, long life and high reliability, and can adapt to complex working environments. JCW series proximity sensors are equipped with power reverse protection, etc., and the operating status of the sensor can be directly observed through the red LED. JCW series proximity sensors are IP67 protected (IEC standard). Depending on the control output, proximity sensors can be divided into NPN type (N type), PNP type (P type), AC type (A type), and DC type (D type). For more information about the proximity sensors, please visit "What is Proximity Sensors".
ImageName
How to order
Features
● Reverse power supply
● Long life and high reliability, high environmental adaptability
● The red LED shows the operating status of the sensor
● Adjustable distance, and simple to operate
● IP67 protection structure (IEC specification)
● Please read "Precautions for Proximity Sensors" before use
Parameters
● Lagging Distance: Less than 10% of detection distance
● Sensing Object: Magnetic metal (if non-magnetic object, the detection distance will be reduced)
● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (36-250VAC), 50/60Hz
● Current Consumption Type N.P — under 13mA; Type D — under 0.8mA; Type A — under 1.7mA
● Control Output: Type N.P — under 300mA; Type D — under 200mA; Type A — under 400mA
● Circuit Protection: Type N.P.D — Reverse power supply protection, and surge absorption; Type A — Surge absorption
● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)
● Ambient Humidity (operating, storage): 35-95%RH
● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)
● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)
● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.
● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.
● Protective Structure: IP67 (IEC standard)
● Material: Housing — nickel plated brass / FRP / ABS; Detection surface — ABS
Dimensions & wiring diagram
Updates
2023-10-28
Upload page data and generate pages.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
