H Series
Inductive Proximity Sensor
H series inductive proximity sensor is a square shape proximity sensor with 20-40mm detection distance , and 0-35mm setting distance. H series proximity sensors have the advantages of cost-effective, simple to operate, long life and high reliability, and can adapt to complex working environments. H series proximity sensors are equipped with power reverse protection, short-circuit protection, etc., and can be directly connected with PLC device. The operating status of the sensor can be directly observed through the red LED, H series proximity sensors are IP67 protected (IEC standard). Depending on the control output, proximity sensors can be divided into NPN type (N type), PNP type (P type), AC type (A type), and DC type (D type). For more information about the proximity sensors, please visit "What is Proximity Sensors".
ImageName
How to order
Features
● Reverse power supply protection, and short circuit protection
● Long life and high reliability, high environmental adaptability
● Directly connect to PLC
● The red LED shows the operating status of the sensor
● Cost-effective and simple to operate
● IP67 protection structure (IEC specification)
● Please read "Precautions for Proximity Sensors" before use
Parameters
● Lagging Distance: Less than 10% of detection distance
● Sensing Object: Magnetic metal (if non-magnetic object, the detection distance will be reduced)
● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (36-250VAC), 50/60Hz
● Current Consumption Type N.P — under 13mA; Type D — under 0.8mA; Type A — under 1.7mA
● Control Output: Type N.P — under 300mA; Type D — under 200mA; Type A — under 400mA
● Circuit Protection: Type N.P.D — Reverse power supply protection, surge absorption, short-circuit protection; Type A — Surge absorption
● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)
● Ambient Humidity (operating, storage): 35-95%RH
● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)
● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)
● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.
● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.
● Protective Structure: IP67 (IEC standard)
● Material: Housing — FRP / ABS; Detection surface — ABS
Datasheet
H Series Proximity Sensor Dimensions 50x50x50 50x50x52 80x80x48 Mounting Methods Unshielded Unshielded Unshielded Models DC NPN NO HD-3020A HE-3025A HM-3040A NC HD-3020B HE-3025B HM-3040B NO+NC HD-3020AB HE-3025AB HM-3040AB PNP NO HD-3020C HE-3025C HM-3040C NC HD-3020D HE-3025D HM-3040D NO+NC HD-3020CD HE-3025CD HM-3040CD 2-wires NO HD-3020AL HE-3025AL HM-3040AL NC HD-3020BL HE-3025BL HM-3040BL AC 2-wires NO HD-2020A HE-2025A HM-2040A NC HD-2020B HE-2025B HM-2040B 3-wires NO+NC HD-2020AB HE-2025AB HM-2040AB Detection Distance 20mm±10% 25mm±10% 40mm±10% Set Distance 0~17mm 0~22mm 0~35mm Standard Sensing Object Steel 50x50x1mm Steel 60x60x1mm Steel 90x90x2mm Response Frequency DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz Outline Dimension Drawing Figure1 Figure2 Figure3
Dimensions & wiring diagram
Updates
2023-10-28
Upload page data and generate pages.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
