ST5-5DD
DIN-Rail Mount Five Channel DC to DC Solid State Relay
ST5 Series
DIN-Rail Mount Solid State Relay
ST5 Series Five Channel DIN-Rail Mount DC to DC Solid State Relay (or 5 channel solid state relay, 10-pin solid state relay) has five independent I/O channels (input-output), therefore, one ST5 Series can act as five one-channel solid state relays, which means five different...
More
Basic Parameters
Control Voltage: 3~24VDC
Control Current: Ultra low input current, ≤10mA
Load Voltage: Five channel, 5~24VDC
Load Current: 5A
Dimensions: 65mm*51mm*30mm
Mounting: DIN-Rail mount
Features
Five I/O channels
Low-impedance MOSFET as the output component minimize the total power consumption
Low output off-state leakage current
Low output on-state voltage drop
Five separate LED output states
Each channel is independent of the other channel, and all channels are freely controllable
Notice
If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.
When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.
* Please contact us if you need to customize according to your special needs.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
