PN5-10DA
DIN-Rail Mount Five Channel DC to AC Solid State Relay
PN5 Series
DIN-Rail Mount Solid State Relay
PN5 Series Five Channel DIN-Rail Mount DC to AC Solid State Relay (or 5 channel solid state relay, 10-pin solid state relay) has five independent I/O channels (input-output), therefore, one PN5 Series can act as five one-channel solid state relays, which means five different...
More
Basic Parameters
Control Voltage: 3~32VDC
Control Current: Ultra low input current, ≤10mA
Load Voltage: Five channel, 24~480VAC
Load Current: 10A
Dimensions: 65mm*51mm*30mm
Mounting: DIN-Rail mount
Features
Five I/O channels
"Ultra low" input current
Low output off-state leakage current
Low output on-state voltage drop
Five separate LED output states
Standard output RC snubber circuit
Each channel is independent of the other channel, and all channels are freely controllable
Notice
If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.
When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.
* Please contact us if you need to customize according to your special needs.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
