Location: Home > Showroom  

Dual Channel Single Phase DC to AC Solid State Relay


MGR-1D_2 Series

Panel Mout Solid State Relay

MGR-1D_2 Series Dual Channel Panel Mount DC to AC Solid State Relay (or 2 channel solid state relay) is a DPDT DC to AC solid state relay, which has two independent I/O channels (input-output), therefore, one MGR-1D_2 Series can act as two MGR-1 Series solid state relays...


Basic Parameters

Control Voltage:  3~32VDC

Control Current:  Ultra low input current, ≤10mA

Load Voltage:  Single phase 24~480VAC

Load Current:  40A

Dimensions:  57.4mm*44.8mm*30.5mm

Mounting:  Panel mount


Two I/O channels, plug-in installation

TRIAC as the output component can be used in commercial or heavy industrial applications with reliable performance

"Ultra low" input current

Low output off-state leakage current

Low output on-state voltage drop

Display output status via LED

Standard output RC snubber circuit

Each channel is independent of the other channel, and all channels are freely controllable


If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

* Please contact us if you need to customize according to your special needs.

  Get in touch with us now!

Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!

*Please check the trash box of your mailbox, if you do not receive our email.