MGR-1AKB4840
SPDT Single Phase AC to AC Solid State Relay
MGR-1AKB Series
Panel Mout Solid State Relay
MGR-1AKB Series Dual Channel Panel Mount AC to AC Solid State Relay is a SPDT AC to AC solid state relay that uses one control signal to control two different loads (These two loads work under the same power supply, and only one load can be turned on at the same time)...
More
Basic Parameters
Control Voltage: 85~265VAC
Control Current: Ultra low input current, ≤10mA
Load Voltage: Single phase 24~480VAC
Load Current: 40A
Dimensions: 57.4mm*44.8mm*28mm
Mounting: Panel mount
Features
TRIAC as the output component can be used in commercial or heavy industrial applications with reliable performance
"Ultra low" input current
Low output off-state leakage current
Low output on-state voltage drop
Display output status via LED
Standard output RC snubber circuit
Transparent cover for extra protection
Notice
If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.
When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.
* Please contact us if you need to customize according to your special needs.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
