MGR-1AD2225
Panel Mount One Channel AC to DC Solid State Relay
MGR-1 Series
Panel Mout Solid State Relay
The MGR-1 series 1 Channel / Single Channel Panel Mount Solid State Relay uses the Standard Package (rectangular shape, TRIAC as the output component). According to the load power supply, it is divided into MGR-1 series One Channel DC Panel Mount SSR, MGR-1 series Single Phase AC Panel Mount SSR...
More
Basic Parameters
Control Voltage: 70-280VAC
Control Current: Ultra low input current, ≤10mA
Load Voltage: One channel, 5~220VDC
Load Current: 25A
Dimensions: 57.4mm*44.8mm*28mm
Mounting: Panel mount
Features
Low output off-state leakage current
Low-impedance MOSFET as the output component minimize the total power consumption
Suitable for resistive load and inductive load (the inductive load, such as motor and EMR /electromagnetic coil, must be equipped with the suppressor diode)
Display output status via LED
Standard output RC snubber circuit
Transparent cover for extra protection
Notice
If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.
When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.
* Please contact us if you need to customize according to your special needs.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
