Location: Home > Showroom  

MGR-1AKB4840
SPDT Single Phase AC to AC Solid State Relay

MGR-1AKB4840

MGR-1AKB Series

Panel Mout Solid State Relay

MGR-1AKB Series Dual Channel Panel Mount AC to AC Solid State Relay is a SPDT AC to AC solid state relay that uses one control signal to control two different loads (These two loads work under the same power supply, and only one load can be turned on at the same time)...

More

Basic Parameters


Control Voltage:  85~265VAC

Control Current:  Ultra low input current, ≤10mA

Load Voltage:  Single phase 24~480VAC

Load Current:  40A

Dimensions:  57.4mm*44.8mm*28mm

Mounting:  Panel mount

Features


TRIAC as the output component can be used in commercial or heavy industrial applications with reliable performance

"Ultra low" input current

Low output off-state leakage current

Low output on-state voltage drop

Display output status via LED

Standard output RC snubber circuit

Transparent cover for extra protection

Notice


If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

* Please contact us if you need to customize according to your special needs.


  Get in touch with us now!


Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!

*Please check the trash box of your mailbox, if you do not receive our email.