TLW Series
Capacitive Proximity Sensor
TLW series inductive proximity sensor is a square shape proximity sensor with 5-7mm detection distance , and 0-5mm setting distance. TLW series proximity sensors have the advantages of cost-effective, simple to operate, long life and high reliability, and can adapt to complex working environments. TLW series proximity sensors are equipped with power reverse protection, short-circuit protection, etc., and can be directly connected with PLC device. The operating status of the sensor can be directly observed through the red LED, TLW series proximity sensors are IP67 protected (IEC standard). Depending on the control output, proximity sensors can be divided into NPN type (N type), PNP type (P type), AC type (A type), and DC type (D type). For more information about the proximity sensors, please visit "What is Proximity Sensors".
ImageName
How to order
Features
● Reverse power supply protection, and short circuit protection
● Long life and high reliability, high environmental adaptability
● Directly connect to PLC
● The red LED shows the operating status of the sensor
● Cost-effective and simple to operate
● IP67 protection structure (IEC specification)
● Please read "Precautions for Proximity Sensors" before use
Parameters
● Lagging Distance: Less than 10% of detection distance
● Sensing Object: Magnetic metal (if non-magnetic object, the detection distance will be reduced)
● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (36-250VAC), 50/60Hz
● Current Consumption Type N.P — under 13mA; Type D — under 0.8mA; Type A — under 1.7mA
● Control Output: Type N.P — under 300mA; Type D — under 200mA; Type A — under 400mA
● Circuit Protection: Type N.P.D — Reverse power supply protection, surge absorption, short-circuit protection; Type A — Surge absorption
● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)
● Ambient Humidity (operating, storage): 35-95%RH
● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)
● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)
● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.
● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.
● Protective Structure: IP67 (IEC standard)
● Material: Housing — ABS; Detection surface — ABS
Datasheet
TLW Series Proximity Sensor Dimensions 30x18x53 30x18x10 50x25x10 45x30x12 Mounting Methods Unshielded Unshielded Unshielded Unshielded Models DC NPN NO TL-W3ME1 TL-W5ME1 TL-W5E1 TL-W7E1 NC TL-W3ME2 TL-W5ME2 TL-W5E2 TL-W7E2 NO+NC PNP NO TL-W3MF1 TL-W5MF1 TL-W5F1 TL-W7F1 NC TL-W3MF2 TL-W5MF2 TL-W5F2 TL-W7F2 NO+NC 2-wires NO TL-W3MD1 TL-W5MD1 TL-W5D1 TL-W7D1 NC TL-W3MD2 TL-W5MD2 TL-W5D2 TL-W7D2 AC 2-wires NO TL-W7A1 NC TL-W7A2 3-wires NO+NC Detection Distance 5mm±10% 5mm±10% 5mm±10% 7mm±10% Set Distance 0~4mm 0~4mm 0~4mm 0~5mm Standard Sensing Object Steel 18x18x1mm Steel 18x18x1mm Steel 18x18x1mm Steel 25x25x1mm Response Frequency DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz Outline Dimension Drawing Figure1 Figure2 Figure3 Figure4
Dimensions & wiring diagram
Updates
2023-10-28
Upload page data and generate pages.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
