P Series
Inductive Proximity Sensor
P series inductive proximity sensor is a square shape proximity sensor with 5-8mm detection distance , and 0-7mm setting distance. Depending on the detection distance, this series of inductive sensors can be divided into PS series (detection distance 5mm, setting distance 0-4mm) and PL series (detection distance 8mm, setting distance 0-7mm). P series proximity sensors have the advantages of cost-effective, simple to operate, long life and high reliability, and can adapt to complex working environments. P series proximity sensors are equipped with power reverse protection, short-circuit protection, etc., and can be directly connected with PLC device. The operating status of the sensor can be directly observed through the red LED, P series proximity sensors are IP67 protected (IEC standard). Depending on the control output, proximity sensors can be divided into NPN type (N type), PNP type (P type), AC type (A type), and DC type (D type). For more information about the proximity sensors, please visit "What is Proximity Sensors".
ImageName
How to order
Features
● Reverse power supply protection, and short circuit protection
● Long life and high reliability, high environmental adaptability
● Directly connect to PLC
● The red LED shows the operating status of the sensor
● Cost-effective and simple to operate
● IP67 protection structure (IEC specification)
● Please read "Precautions for Proximity Sensors" before use
Parameters
● Lagging Distance: Less than 10% of detection distance
● Sensing Object: Magnetic metal (if non-magnetic object, the detection distance will be reduced)
● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (36-250VAC), 50/60Hz
● Current Consumption Type N.P — under 13mA; Type D — under 0.8mA; Type A — under 1.7mA
● Control Output: Type N.P — under 300mA; Type D — under 200mA; Type A — under 400mA
● Circuit Protection: Type N.P.D — Reverse power supply protection, surge absorption, short-circuit protection; Type A — Surge absorption
● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)
● Ambient Humidity (operating, storage): 35-95%RH
● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)
● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)
● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.
● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.
● Protective Structure: IP67 (IEC standard)
● Material: Housing — ABS; Detection surface — ABS
Datasheet
P Series Proximity Sensor Dimensions 17x17x28 17x17x28 17x17x35 17x17x35 Mounting Methods Unshielded Unshielded Unshielded Unshielded Models DC NPN NO PS-05N PS-08N PL-05N PL -08N NC PS-05N2 PS-08N2 PL-05N2 PL -08N2 NO+NC PNP NO PS-05P PS-08P PL-05P PL -08P NC PS-05P2 PS-08P2 PL -05P2 PL -08P2 NO+NC 2-wires NO PS-05D PS-08D PL-05D PL-08D NC PS-05D2 PS-08D2 PL-05D2 PL-08D2 AC 2-wires NO PS-05A PS-08A PL-05A PL -08A NC PS-05A2 PS-08A2 PL-05A2 PL-08A2 3-wires NO+NC Detection Distance 5mm±10% 8mm±10% 5mm±10% 8mm±10% Set Distance 0~4mm 0~7mm 0~4mm 0~7mm Standard Sensing Object Steel 18x18x1mm Steel 18x18x1mm Steel 18x18x1mm Steel 18x18x1mm Response Frequency DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz Outline Dimension Drawing Figure1 Figure2
Dimensions & wiring diagram
Updates
2023-10-28
Upload page data and generate pages.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
