GN Series
Capacitive Proximity Sensor
GN series inductive proximity sensor is a square shape proximity sensor with 2-4mm detection distance , and 0-3.6mm setting distance. GN series proximity sensors have the advantages of cost-effective, simple to operate, long life and high reliability, and can adapt to complex working environments. GN series proximity sensors are equipped with power reverse protection, short-circuit protection, etc., and can be directly connected with PLC device. The operating status of the sensor can be directly observed through the red LED, GN series proximity sensors are IP67 protected (IEC standard). Depending on the control output, proximity sensors can be divided into NPN type (N type), PNP type (P type), AC type (A type), and DC type (D type). For more information about the proximity sensors, please visit "What is Proximity Sensors".
ImageName
How to order
Features
● Reverse power supply protection, and short circuit protection
● Long life and high reliability, high environmental adaptability
● Directly connect to PLC
● The red LED shows the operating status of the sensor
● Cost-effective and simple to operate
● IP67 protection structure (IEC specification)
● Please read "Precautions for Proximity Sensors" before use
Parameters
● Lagging Distance: Less than 10% of detection distance
● Sensing Object: Magnetic metal (if non-magnetic object, the detection distance will be reduced)
● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (36-250VAC), 50/60Hz
● Current Consumption Type N.P — under 13mA; Type D — under 0.8mA; Type A — under 1.7mA
● Control Output: Type N.P — under 300mA; Type D — under 200mA; Type A — under 400mA
● Circuit Protection: Type N.P.D — Reverse power supply protection, surge absorption, short-circuit protection; Type A — Surge absorption
● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)
● Ambient Humidity (operating, storage): 35-95%RH
● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)
● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)
● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.
● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.
● Protective Structure: IP67 (IEC standard)
● Material: Housing — ABS; Detection surface — ABS
Datasheet
GN Series Proximity Sensor Dimensions 40x26x12 40x26x12 Mounting Methods Unshielded Unshielded Models DC NPN NO GN-0224NA GN-0224NA NC GN-0224NB GN-0224NB NO+NC PNP NO GN-0224PA GN-0224PA NC GN-0224PB GN-0224PB NO+NC 2-wires NO GN-0224LA GN-0224LA NC GN-0224LB GN-0224LB AC 2-wires NO GN-0222KA GN-0222KA NC GN-0222KB GN-0222KB 3-wires NO+NC Detection Distance 2mm±10% 4mm±10% Set Distance 0~1.6mm 0~3.6mm Standard Sensing Object Steel 12x12x1mm Steel 18x18x1mm Response Frequency DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz Outline Dimension Drawing Figure1
Dimensions & wiring diagram
Updates
2023-10-28
Upload page data and generate pages.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
