Bi, Ni Series
Inductive Proximity Sensor
Bi, Ni series inductive proximity sensor is a universal cylindrical shape proximity sensor, with 1.5-10mm detection distance , and 0-13mm setting distance. Bi series inductive proximity sensors are shielded proximity sensors, Ni series inductive proximity sensors are unshielded proximity sensors. Bi, Ni series inductive proximity sensor adopts the full-threaded design, which reduces the installation dimensions, and is easy to install, and it can be clamped directly with a wrench. Bi, Ni series proximity sensors use high-quality chips, which have the advantages of long life and high reliability, and can adapt to complex working environments. Bi, Ni series proximity sensors are equipped with power reverse protection, short-circuit protection, current overload protection, etc., and can be directly connected with PLC device. The operating status of the sensor can be directly observed through the red LED, Bi, Ni series proximity sensors are IP67 protected (IEC standard). Bi, Ni series proximity sensors also have a enhanced shell strength and improved wire breakage countermeasures. Depending on the control output, proximity sensors can be divided into NPN type (Type N), PNP type (Type P), AC type (Type A), and DC type (Type D). For more information about the proximity sensors, please visit "What is Proximity Sensors".
ImageName
How to order
Features
● Components using high-quality chips
● Reverse power supply protection, short circuit protection, and current overload protection
● Long life and high reliability, high environmental adaptability
● Directly connect to PLC
● The red LED shows the operating status of the sensor
● Full-threaded design reduces mounting dimensions and allows for direct wrench clamping
● Enhanced shell strength, and improved wire breakage countermeasures
● IP67 protection structure (IEC specification)
● Please read "Precautions for Proximity Sensors" before use
Parameters
● Lagging Distance: Less than 10% of detection distance
● Sensing Object: Magnetic metal (if non-magnetic object, the detection distance will be reduced)
● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (36-250VAC), 50/60Hz
● Current Consumption Type N.P — under 13mA; Type D — under 0.8mA; Type A — under 1.7mA
● Control Output: Type N.P — under 300mA; Type D — under 200mA; Type A — under 400mA
● Circuit Protection: Type N.P.D — Reverse power supply protection, surge absorption, short-circuit protection; Type A — Surge absorption
● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)
● Ambient Humidity (operating, storage): 35-95%RH
● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)
● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)
● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.
● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.
● Protective Structure: IP67 (IEC standard)
● Material: Housing — nickel plated brass; Detection surface — ABS
Datasheet
Dimensions M8 M12 Mounting Methods Shielded Unshielded Shielded Unshielded Models DC NPN NO Bi1.5-M8-AN6X Ni2-M8-AN6X Bi2-M12-AN6X Ni4-M12-AN6X NC Bi1.5-M8-RN6X Ni2-M8-RN6X Bi2-M12-RN6X Ni4-M12-RN6X NO+NC PNP NO Bi1.5-M8-AP6X Ni2-M8-AP6X Bi2-M12-AP6X Ni4-M12-AP6X NC Bi1.5-M8-RP6X Ni2-M8-RP6X Bi2-M12-RP6X Ni4-M12-RP6X NO+NC 2-wires NO Bi1.5-M8-AD4X Ni2-M8-AD4X Bi2-M12-AD4X Ni4-M12-AD4X NC Bi1.5-M8-AD4X Ni2-M8-AD4X Bi2-M12-AD4X Ni4-M12-AD4X AC 2-wires NO Bi1.5-M8-AZ3X Ni2-M8-AZ3X Bi2-M12-AZ3X Ni4-M12-AZ3X NC Bi1.5-M8-RZ3X Ni2-M8-RZ3X Bi2-M12-RZ3X Ni4-M12-RZ3X 3-wires NO+NC Detection Distance 1.5mm±10% 2mm±10% 2mm±10% 4mm±10% Set Distance 0~1.2mm 0~1.6mm 0~1.6mm 0~3.2mm Standard Sensing Object Steel 8x8x1mm Steel 12x12x1mm Steel 12x12x1mm Steel 15x15x1mm Response Frequency DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz Outline Dimension Drawing Figure1 Figure2 Figure3 Figure4 Dimensions M18 M30 Mounting Methods Shielded Unshielded Shielded Unshielded Models DC NPN NO Bi5-M18-AN6X Ni8-M18-AN6X Bi10-M30-AN6X Ni15-M30-AN6X NC Bi5-M18-RN6X Ni8-M18-RN6X Bi10-M30-RN6X Ni15-M30-RN6X NO+NC PNP NO Bi5-M18-AP6X Ni8-M18-AP6X Bi10-M30-AP6X Ni15-M30-AP6X NC Bi5-M18-RP6X Ni8-M18-RP6X Bi10-M30-RP6X Ni15-M30-RP6X NO+NC 2-wires NO Bi5-M18-AD4X Ni8-M18-AD4X Bi10-M30-AD4X Ni15-M30-AD4X NC Bi5-M18-AD4X Ni8-M18-AD4X Bi10-M30-AD4X Ni15-M30-AD4X AC 2-wires NO Bi5-M18-AZ3X Ni8-M18-AZ3X Bi10-M30-AZ3X Ni15-M30-AZ3X NC Bi5-M18-RZ3X Ni8-M18-RZ3X Bi10-M30-RZ3X Ni15-M30-RZ3X 3-wires NO+NC Detection Distance 5mm±10% 8mm±10% 10mm±10% 15mm±10% Set Distance 0~4mm 0~7mm 0~8mm 0~13mm Standard Sensing Object Steel 18x18x1mm Steel 30x30x1mm Steel 30x30x1mm Steel 54x54x1mm Response Frequency DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz DC:0.5KHz, AC:25Hz Outline Dimension Drawing Figure5 Figure6 Figure7 Figure8
Dimensions & wiring diagram
Updates
2023-10-27
Upload page data and generate pages.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
