Location: Home > Product  

M Series Amplifier Separate Type Photoelectric Sensor

M Series
Amplifier Separate Type Photoelectric Sensor

M series amplifier separate type photoelectric sensor is a cylindrical shape photoelectric sensor with 1ms turn-on delay. The detection methods of the M series are thru-beam, retro-reflection, and diffuse-reflection. M series photoelectric sensor adopts the full-threaded design, which reduces the installation dimensions, and is easy to install, and it can be clamped directly with a wrench. M series photoelectric sensors use high-quality chips, which have the advantages of long life and high reliability, and can adapt to complex working environments. M series photoelectric sensors are equipped with power reverse protection, short-circuit protection, current overload protection, etc., and can be directly connected with PLC device. The operating status of the sensor can be directly observed through the red LED, M series photoelectric sensors are IP67 protected (IEC standard). M series photoelectric sensors also have a enhanced shell strength and improved wire breakage countermeasures. Depending on the control output, photoelectric sensors can be divided into NPN type (Type N), PNP type (Type P), AC type (Type A), and Relay type (Type J). For more information about the proximity sensors, please visit "What is Photoelectric Sensors".

  • M30G thru-beam
  • M30G retro-reflection

ImageName

Model
Data&Sheet
Dimensions
Updates

How to order


Features


● Components using high-quality chips

● Reverse power supply protection, short circuit protection, and current overload protection

● Long life and high reliability, high environmental adaptability

● Directly connect to PLC

● The red LED shows the operating status of the sensor

● Full-threaded design reduces mounting dimensions and allows for direct wrench clamping

● Enhanced shell strength, and improved wire breakage countermeasures

● IP67 protection structure (IEC specification)

● Please read "Precautions for Photoelectric Sensors" before use

Parameters


● Turn-on Delay: 1.5ms

● Light Source: Infrared light 660nm

● Detection Method: Thru-beam, Retro-reflection, Diffuse-reflection

● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (90-250VAC), 50/60Hz

● Current Consumption Type N.P — under 20mA; Type A — under 1.7mA

● Control Output: Type N.P – below 300mA; Type A – below 400mA; Type J – below 2A (contact life above 100,000 cycles)

● Circuit Protection: N.P.D type — Reverse power supply protection, surge absorption, short-circuit protection; A Type — Surge absorption

● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)

● Ambient Humidity (operating, storage): 35-95%RH

● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)

● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)

● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.

● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.

● Protective Structure: IP67 (IEC standard)

● Material: Housing — nickel plated brass/ ABS; Detection surface  (Lens)  — PMMA

Datasheet


M Series Photoelectric Sensors
DimensionsM12x1(Plastic housing)M12x1(Copper housing)
Mounting MethodsDiffuse-reflectionThru-beamDiffuse-reflectionThru-beam
ModelsDCNPNNOM12G-D05N1M12G-T3N1/3FM12GT-D05N1M12GT-T3N1/3F
NCM12G-D05N2M12G-T3N2/3FM12GT-D05N2M12GT-T3N2/3F
NO+NC



PNPNOM12G-D05P1M12G-T3P1/3FM12GT-D05P1M12GT-T3P1/3F
NCM12G-D05P2M12G-T3P2/3FM12GT-D05P2M12GT-T3P2/3F
NO+NC



NPN/PNP/NO/NC



AC2-wiresNO



NC



3-wires



Relay Outputs



Detection Distance5cm±10%3m±10%5cm±10%3m±10%
Standard Sensing ObjectOpaqueTransparent / OpaqueOpaqueOpaque
Detection Distance adjustmentFixedFixedSensitivity regulatorFixed
Response Frequency1ms1ms1ms1ms
Outline Dimension DrawingFigure1Figure2

DimensionsM18x1(Plastic housing)
Mounting MethodsDiffuse-reflectionRetro-reflectionThru-beam
ModelsDCNPNNOM18G-D10N1M18G-D30N1M18G-R2N1M18G-T5N1/5F
NCM18G-D10N2M18G-D30N2M18G-R2N2M18G-T5N2/5F
NO+NCM18G-D10N3M18G-D30N3M18G-R2N3M18G-T5N3/5F
PNPNOM18G-D10P1M18G-D30P1M18G-R2P1M18G-T5P1/5F
NCM18G-D10P2M18G-D30P2M18G-R2P2M18G-T5P2/5F
NO+NCM18G-D10P3M18G-D30P3M18G-R2P3M18G-T5P3/5F
NPN/PNP/NO/NC



AC2-wiresNOM18G-D10A1M18G-D30A1M18G-R2A1M18G-T5A1/5F
NCM18G-D10A2M18G-D30A2M18G-R2A2M18G-T5A2/5F
3-wires



Relay Outputs



Detection Distance10cm±10%10-30cm±10%2m±10%5m±10%
Standard Sensing ObjectTransparent / opaqueTransparent / OpaqueOpaqueTransparent / Opaque
Detection Distance adjustmentSensitivity regulatorSensitivity regulatorSensitivity regulatorFixed
Response Frequency1ms1ms1ms1ms
Outline Dimension DrawingFigure3

DimensionsM18x1(Copper housing)
Mounting MethodsDiffuse-reflectionRetro-reflectionThru-beamDiffuse-reflection
ModelsDCNPNNOM18GT-D1ON1M18GT-D30N1M18GT-R2N1M18GT-T5N1/5F
NCM18GT-D10N2M18GT-D30N2M18GT-R2N2M18GT-T5N2/5F
NO+NCM18GT-D10N3M18GT-D30N3M18GT-R2N3M18GT-T5N3/5F
PNPNOM18GT-D10P1M18GT-D30P1M18GT-R2P1M18GT-T5P1/5F
NCM18GT-D10P2M18GT-D30P2M18GT-R2P2M18GT-T5P2/5F
NO+NCM18GT-D10P3M18GT-D30P3M18GT-R2P3M18GT-T5P3/5F
NPN/PNP/NO/NC



AC2-wiresNOM18GT-D10A1M18GT-D30A1M18GT-R2A1M18GT-T5A1/5F
NCM18GT-D10A2M18GT-D30A2M18GT-R2A2M18GT-T5A2/5F
3-wires



Relay Outputs



Detection Distance10cm±10%10-30cm±10%2m±10%5m±10%
Standard Sensing ObjectTransparent / OpaqueTransparent / OpaqueOpaqueOpaque
Detection Distance adjustmentSensitivity regulatorSensitivity regulatorFixedSensitivity regulator
Response Frequency1ms1ms1ms1ms
Outline Dimension DrawingFigure4

DimensionsM30x1(Plastic housing)
Mounting MethodsDiffuse-reflectionRetro-reflectionThru-beam
ModelsDCNPNNOM30G-D70N1M30G-R5N 1M30G-T10N1/10F
NCM30G-D70N2M30G-R5N2M30G-T10N2/10F
NO+NCM30G-D70N3M30G-R5N3
PNPNOM30G-D70P1M30G-R5P1M30G-T10P1/10F
NCM30G-D70P2M30G-R5P2M30G-T10P2/10F
NO+NCM30G-D70P3M30G-R5P3
NPN/PNP/NO/NC


AC2-wiresNOM30G-D70A1M30G-R5A1M30G-T10A1/10F
NCM30G-D70A2M30G-R5A2M30G-T10A2/10F
3-wires


Relay Outputs


Detection Distance70cm±10%5m±10%10m±10%
Standard Sensing ObjectTransparent / OpaqueTransparent / OpaqueOpaque
Detection Distance adjustmentFixedSensitivity regulatorSensitivity regulator
Response Frequency1ms1ms1ms
Outline Dimension DrawingFigure5

Dimensions & wiring diagram


M series, dimensions and wiring diagram, Photoelectric Sensor, Amplifier Separate Type

Updates


2023-10-27

Upload page data and generate pages.


  Get in touch with us now!


Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!

*Please check the trash box of your mailbox, if you do not receive our email.