E3S-DS Series
Amplifier Built-in Type Photoelectric Sensor

● Components using high-quality chips

● Reverse power supply protection, short circuit protection, and current overload protection

● Long life and high reliability, high environmental adaptability

● Directly connect to PLC

● The red LED shows the operating status of the sensor

● Enhanced shell strength, and improved wire breakage countermeasures

● IP65 protection structure (IEC specification)

● Please read "Precautions for Photoelectric Sensors" before use

● Turn-on Delay: 1.5ms

● Light Source: Infrared light 660nm

● Detection Method: Thru-beam, Retro-reflection, Diffuse-reflection

● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (90-250VAC), 50/60Hz

● Current Consumption Type N.P — under 20mA; Type A — under 1.7mA

● Control Output: Type N.P – below 300mA; Type A – below 400mA; Type J – below 2A (contact life above 100,000 cycles)

● Circuit Protection: N.P.D type — Reverse power supply protection, surge absorption, short-circuit protection; A Type — Surge absorption

● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)

● Ambient Humidity (operating, storage): 35-95%RH

● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)

● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)

● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.

● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.

● Protective Structure: IP65 (IEC standard)

● Material: Housing — nickel plated brass/ ABS; Detection surface  (Lens)  — PMMA

2023-10-27

Upload page data and generate pages.