Location: Home > Product  

E3F Series Amplifier Separate Type Photoelectric Sensor

E3F Series
Amplifier Separate Type Photoelectric Sensor

E3F series amplifier separate type photoelectric sensor is a cylindrical shape photoelectric sensor with 1ms turn-on delay. The detection methods of the E3F series are thru-beam, retro-reflection, and diffuse-reflection. E3F series photoelectric sensor adopts the full-threaded design, which reduces the installation dimensions, and is easy to install, and it can be clamped directly with a wrench. E3F series photoelectric sensors use high-quality chips, which have the advantages of long life and high reliability, and can adapt to complex working environments. E3F series photoelectric sensors are equipped with power reverse protection, short-circuit protection, current overload protection, etc., and can be directly connected with PLC device. The operating status of the sensor can be directly observed through the red LED, E3F series photoelectric sensors are IP67 protected (IEC standard). E3F series photoelectric sensors also have a enhanced shell strength and improved wire breakage countermeasures. Depending on the control output, photoelectric sensors can be divided into NPN type (Type N), PNP type (Type P), AC type (Type A), and Relay type (Type J). For more information about the proximity sensors, please visit "What is Photoelectric Sensors".

  • E3F3_1
  • E3F3_2
  • E3F

ImageName

Model
Data&Sheet
Dimensions
Updates

How to order


Features


● Components using high-quality chips

● Reverse power supply protection, short circuit protection, and current overload protection

● Long life and high reliability, high environmental adaptability

● Directly connect to PLC

● The red LED shows the operating status of the sensor

● Full-threaded design reduces mounting dimensions and allows for direct wrench clamping

● Enhanced shell strength, and improved wire breakage countermeasures

● IP67 protection structure (IEC specification)

● Please read "Precautions for Photoelectric Sensors" before use

Parameters


● Turn-on Delay: 1.5ms

● Light Source: Infrared light 660nm

● Detection Method: Thru-beam, Retro-reflection, Diffuse-reflection

● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (90-250VAC), 50/60Hz

● Current Consumption Type N.P — under 20mA; Type A — under 1.7mA

● Control Output: Type N.P – below 300mA; Type A – below 400mA; Type J – below 2A (contact life above 100,000 cycles)

● Circuit Protection: N.P.D type — Reverse power supply protection, surge absorption, short-circuit protection; A Type — Surge absorption

● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)

● Ambient Humidity (operating, storage): 35-95%RH

● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)

● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)

● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.

● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.

● Protective Structure: IP67 (IEC standard)

● Material: Housing — nickel plated brass/ ABS; Detection surface  (Lens)  — PMMA

Datasheet


E3F Series Photoelectric Sensors
DimensionsM8x1M12x1
Mounting MethodsThru-beamDiffuse-reflectionRetro-reflectionThru-beam
ModelsDCNPNNOE3F01-2DN1-2LE3F1-DS5C4E3F1-R1C1E3F1-3DN1-3L
NCE3F01-2DN2-2LE3F1-DS5C2E3F1-R1C2E3F1-3DN2-3L
NO+NC



PNPNOE3F01-2DP1-2LE3F1-DS5P1E3F1-R1P1E3F1-3DP1-3L
NCE3F01-2DP2-2LE3F1-DS5P2E3F1-R1P2E3F1-3DP2-3L
NO+NC



NPN/PNP/NO/NC



AC2-wiresNO



NC



3-wires



Relay Outputs



Detection Distance2m±10%5cm±10%1m±10%3m±10%
Standard Sensing ObjectOpaqueTransparent / OpaqueOpaqueOpaque
Detection Distance adjustmentFixedFixedSensitivity regulatorFixed
Response Frequency1ms1ms1ms1ms
Outline Dimension DrawingFigure1Figure2

DimensionsM18x1
Mounting MethodsDiffuse-reflectionRetro-reflectionThru-beam
ModelsDCNPNNOE3F-DS10C4E3F-DS30C4E3F-R2C1E3F-5DN1-5L
NCE3F-DS10C2E3F-DS30C2E3F-R2C2E3F-5DN2-5L
NO+NCE3F-DS10C3E3F-DS30C3E3F-R2C3E3F-5DN3-5L
PNPNOE3F-DS10P1E3F-DS30P1E3F-R2P1E3F-5DP1-5L
NCE3F-DS10P2E3F-DS30P2E3F-R2P2E3F-5DP2-5L
NO+NCE3F-DS10P3E3F-DS30P3E3F-R2P3E3F-5DP3-5L
NPN/PNP/NO/NCE3F-DS10XE3F-DS30XE3F-R2XE3F-5DX-5L
AC2-wiresNOE3F-DS10Y1E3F-DS30Y1E3F-R2Y1E3F-5DY1-5LY
NCE3F-DS10Y2E3F-DS30Y2E3F-R2Y2E3F-5DY2-5LY
3-wires



Relay Outputs



Detection Distance10cm±10%10-30cm±10%2m±10%5m±10%
Standard Sensing ObjectTransparent / OpaqueTransparent / OpaqueOpaqueOpaque
Detection Distance adjustmentFixedSensitivity regulatorSensitivity regulatorFixed
Response Frequency1ms1ms1ms1ms
Outline Dimension DrawingFigure3

DimensionsM18x1
Mounting MethodsDiffuse-reflectionRetro-reflectionThru-beam
ModelsDCNPNNOE3F3-D11E3F3-D12E3F3-R11E3F3-T11
NCE3F3-D61E3F3-D62E3F3-R61E3F3-T61
NO+NC



PNPNOE3F3-D31E3F3-D32E3F3-R31E3F3-T31
NCE3F3-D81E3F3-D82E3F3-R81E3F3-T81
NO+NC



NPN/PNP/NO/NC



AC2-wiresNO



NC



3-wires



Relay Outputs



Detection Distance10cm±10%10-30cm±10%3m±10%5m±10%
Standard Sensing ObjectTransparent / OpaqueTransparent / OpaqueOpaqueOpaque
Detection Distance adjustmentSensitivity regulatorSensitivity regulatorSensitivity regulatorFixed
Response Frequency1ms1ms1ms1ms
Outline Dimension DrawingFigure4

DimensionsM30x1.5
Mounting MethodsDiffuse-reflectionRetro-reflectionThru-beam
ModelsDCNPNNOE3F3-DS70C1E3F3-R4C1E3F3-10DN1-10L
NCE3F3-DS70C2E3F3-R4C2E3F3-10DN2-10L
NO+NCE3F3-DS70C3E3F3-R4C3E3F3-10DN3-10L
PNPNOE3F3-DS70P1E3F3-R4P1E3F3-10DP1-10L
NCE3F3-DS70P2E3F3-R4P2E3F3-10DP2-10L
NO+NCE3F3-DS70P3E3F3-R4P3E3F3-10DP3-10L
NPN/PNP/NO/NC


AC2-wiresNOE3F-DS70Y1E3F3-R4Y1E3F-10DY1-10LY
NCE3F-DS70Y2E3F3-R4Y2E3F-10DY2-10LY
3-wires


Relay Outputs


Detection Distance70cm±10%4m±10%10m±10%
Standard Sensing ObjectTransparent / OpaqueOpaqueOpaque
Detection Distance adjustmentSensitivity regulatorSensitivity regulatorFixed
Response Frequency1ms1ms1ms
Outline Dimension DrawingFigure5

Dimensions & wiring diagram


Ni series, dimensions and wiring diagram, Photoelectric Sensor

Updates


2023-10-27

Upload page data and generate pages.


  Get in touch with us now!


Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!

*Please check the trash box of your mailbox, if you do not receive our email.