MGR-3M4825
Three Phase AC Reversible Electrical Motor Rotation Controller
MGR-3M Series
Electrical Motor Controller
MGR-3M Series Three Phase AC Reversible Electrical Motor Rotation Controller is a Panel Mount DC to AC solid state relay. As a three phase reversible motor controller, MGR-3M Series uses DC control signal to control the direction of the Three Phase AC FWD/REV Bi-directional Electrical Motor...
More
Basic Parameters
Control Voltage: 10~32VDC
Load Voltage: Single phase 480VAC
Load Current: 25A
Dimensions: 105mm*75mm*33mm
Mounting: Panel mount
Features
TRIAC as the output component can be used in commercial or heavy industrial applications with reliable performance
"Ultra low" input current
Low output off-state leakage current
Low output on-state voltage drop
Two color (Red & Green) LED output status
Standard output RC snubber circuit
Built-in forward/reverse interlock protection function
Notice
If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.
When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.
* Please contact us if you need to customize according to your special needs.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.
