TL Series
Capacitive Proximity Sensor

● Reverse power supply protection, and short circuit protection

● Long life and high reliability, high environmental adaptability

● Directly connect to PLC

● The red LED shows the operating status of the sensor

● Cost-effective and simple to operate

● IP67 protection structure (IEC specification)

● Please read "Precautions for Proximity Sensors" before use

● Lagging Distance: Less than 10% of detection distance

● Sensing Object: Magnetic metal (if non-magnetic object, the detection distance will be reduced)

● Supply Voltage: DC type — 12-24VDC (6-36VDC) with voltage pulsation (p-p) below 10%; AC type — 110-220VAC (36-250VAC), 50/60Hz

● Current Consumption Type N.P — under 13mA; Type D — under 0.8mA; Type A — under 1.7mA

● Control Output: Type N.P — under 300mA; Type D — under 200mA; Type A — under 400mA

● Circuit Protection: Type N.P.D — Reverse power supply protection, surge absorption, short-circuit protection; Type A — Surge absorption

● Ambient Temperature (operating, storage): -30-+65°C (non-freezing, non-condensing)

● Ambient Humidity (operating, storage): 35-95%RH

● Insulation Impedance: Above 50 MΩ (between the charging section and the housing, using a DC500 megohmmeter)

● Withstanding Voltage (1min): 1000VAC, 50/60Hz (between charging section and case)

● Temperature Effect: If the temperature range is -30 to +65℃, the sensing distance is within ±15% of the detection distance at +23℃; if the temperature range is -25 to +60℃, the sensing distance is within ±10% of the detection distance at +23℃.

● Voltage Effect: If the voltage range is within ±15% of the rated supply voltage, the sensing distance is within ±10% of the detection distance at the rated supply voltage.

● Protective Structure: IP67 (IEC standard)

● Material: Housing — ABS; Detection surface — ABS

2023-10-27

Upload page data and generate pages.